初版

SDK/interface/btstack/third_party/rcsp/JL_rcsp_protocol.h

@@ -0,0 +1,105 @@
+#ifndef __JL_PROTOCOL_H__
+#define __JL_PROTOCOL_H__
+
+#include "typedef.h"
+#include "JL_rcsp_packet.h"
+
+enum {
+    JL_NOT_NEED_RESPOND = 0,
+    JL_NEED_RESPOND,
+};
+
+typedef enum __JL_ERR {
+    JL_ERR_NONE = 0x0,
+    JL_ERR_SEND_DATA_OVER_LIMIT,
+    JL_ERR_SEND_BUSY,
+    JL_ERR_SEND_NOT_READY,
+    JL_ERR_EXIT,
+    JL_ERR_SLAVE_SEND,
+    JL_ERR_MAX,
+} JL_ERR;
+
+typedef enum __JL_PRO_STATUS {
+    JL_PRO_STATUS_SUCCESS = 0x0,
+    JL_PRO_STATUS_FAIL,
+    JL_PRO_STATUS_UNKOWN_CMD,
+    JL_PRO_STATUS_BUSY,
+    JL_PRO_STATUS_NO_RESPONSE,
+    JL_PRO_STATUS_CRC_ERR,
+    JL_PRO_STATUS_ALL_DATA_CRC_ERR,
+    JL_PRO_STATUS_PARAM_ERR,
+    JL_PRO_STATUS_RESP_DATA_OVER_LIMIT,
+
+} JL_PRO_STATUS;
+
+///*< JL_CMD、JL_CMD_response、JL_DATA、JL_DATA_response packet send functions>*/
+JL_ERR JL_CMD_send(u8 OpCode, u8 *data, u16 len, u8 request_rsp, u16 ble_con_handle, u8 *spp_remote_addr);
+JL_ERR JL_CMD_response_send(u8 OpCode, u8 status, u8 sn, u8 *data, u16 len, u16 ble_con_handle, u8 *spp_remote_addr);
+JL_ERR JL_DATA_send(u8 OpCode, u8 CMD_OpCode, u8 *data, u16 len, u8 request_rsp, u16 ble_con_handle, u8 *spp_remote_addr);
+JL_ERR JL_DATA_response_send(u8 OpCode, u8 status, u8 sn, u8 CMD_OpCode, u8 *data, u16 len, u16 ble_con_handle, u8 *spp_remote_addr);
+
+///*<JL_CMD、JL_CMD_response、JL_DATA、JL_DATA_response recieve>*/
+typedef struct __JL_PRO_CB {
+    /*send function callback, SPP or ble*/
+    void *priv;
+    // bool (*fw_ready)(void *priv);
+    // s32(*fw_send)(void *priv, void *buf, u16 len);
+
+    /*JL_CMD、JL_CMD_response、JL_DATA、JL_DATA_response packet recieve callback*/
+    void (*CMD_resp)(void *priv, u8 OpCode, u8 OpCode_SN, u8 *data, u16 len, u16 ble_con_handle, u8 *spp_remote_addr);
+    void (*DATA_resp)(void *priv, u8 OpCode_SN, u8 CMD_OpCode, u8 *data, u16 len, u16 ble_con_handle, u8 *spp_remote_addr);
+    void (*CMD_no_resp)(void *priv, u8 OpCode, u8 *data, u16 len, u16 ble_con_handle, u8 *spp_remote_addr);
+    void (*DATA_no_resp)(void *priv, u8 CMD_OpCode, u8 *data, u16 len, u16 ble_con_handle, u8 *spp_remote_addr);
+    void (*CMD_recieve_resp)(void *priv, u8 OpCode, u8 status, u8 *data, u16 len, u16 ble_con_handle, u8 *spp_remote_addr);
+    void (*DATA_recieve_resp)(void *priv, u8 status, u8 CMD_OpCode, u8 *data, u16 len, u16 ble_con_handle, u8 *spp_remote_addr);
+    u8(*wait_resp_timeout)(void *priv, u8 OpCode, u8 counter);
+    // void (*auth_pass_callback)(void *priv);
+} JL_PRO_CB;
+
+#pragma pack(1)
+typedef struct _rcsp_bound_hdl {
+    u16 ble_con_handle;
+    u8 spp_remote_addr[6];
+} JL_rcsp_bound_hdl;
+#pragma pack()
+
+// 一拖二设备标识与底层buf的绑定
+void rcsp_protocol_bound(u16 ble_con_handle, u8 *spp_remote_addr);
+// 一拖二设备标识与底层buf的解除绑定
+void rcsp_protocol_reset_bound(u16 ble_con_handle, u8 *spp_remote_addr);
+
+/**
+ * @brief 设置协议绑定信息
+ *
+ * @param hdl 第一个连接设备的协议绑定信息
+ * @param hdl1 第二个连接设备的协议绑定信息
+ */
+void rcsp_protocol_set_bound_hdl(JL_rcsp_bound_hdl *hdl, JL_rcsp_bound_hdl *hdl1);
+
+/**
+ * @brief 获取协议绑定信息
+ *
+ * @param hdl 第一个连接设备的协议绑定信息
+ * @param hdl1 第二个连接设备的协议绑定信息
+ */
+void rcsp_protocol_get_bound_hdl(JL_rcsp_bound_hdl *hdl, JL_rcsp_bound_hdl *hdl1);
+
+extern u32 rcsp_protocol_need_buf_size(void);
+
+extern void JL_protocol_init(u8 *buf, u32 len);
+extern void JL_protocol_exit(void);
+
+extern void JL_protocol_dev_switch(const JL_PRO_CB *cb);
+
+extern void JL_protocol_data_recieve(void *priv, void *buf, u16 len, u16 ble_con_handle, u8 *spp_remote_addr);
+extern void JL_protocol_resume(void);
+
+extern bool rcsp_send_list_is_empty(void);
+
+extern void JL_send_packet_process(void);
+extern void JL_recieve_packet_parse_process(void);
+
+
+#endif//__JL_PROTOCOL_H__
+
+