huxi
124 lines
5.5 KiB
C
124 lines
5.5 KiB
C
#ifndef _IIC_API_H_
|
|
#define _IIC_API_H_
|
|
|
|
#include "typedef.h"
|
|
#include "gpio.h"
|
|
|
|
|
|
enum iic_state_enum {
|
|
IIC_OK = 0,
|
|
IIC_ERROR_INIT_FAIL = -1,
|
|
IIC_ERROR_NO_INIT = -2,
|
|
IIC_ERROR_SUSPEND_FAIL = -3,
|
|
IIC_ERROR_RESUME_FAIL = -4,
|
|
IIC_ERROR_BUSY = -5,
|
|
IIC_ERROR_PARAM_ERROR = -6,
|
|
IIC_ERROR_DEV_ADDR_ACK_ERROR = -7,
|
|
IIC_ERROR_REG_ADDR_ACK_ERROR = -8,
|
|
IIC_ERROR_INDEX_ERROR = -9,
|
|
IIC_ERROR_FREQUENCY_ERROR = -10,
|
|
IIC_ERROR_RESLOCK_BUSY = -11,
|
|
IIC_ERROR_MASTER_ERROR = -12,//iic主机卡死
|
|
};
|
|
|
|
enum iic_role {IIC_MASTER, IIC_SLAVE};
|
|
|
|
struct iic_master_config {
|
|
enum iic_role role; //软件只有IIC_MASTER
|
|
int scl_io;
|
|
int sda_io;
|
|
u8 io_mode;//1:上拉或0:浮空
|
|
enum gpio_drive_strength hdrive; //enum GPIO_HDRIVE 0:2.4MA, 1:8MA, 2:26.4MA, 3:40MA
|
|
u32 master_frequency; //软件iic频率(hz 不准)
|
|
u8 ie_en; //中断使能
|
|
u8 irq_priority; //中断
|
|
//br27,28,36:0:close filter; 1:enable filter
|
|
//br50:0:close filter; 1:<1*Tiic_baud_clk, 2:<2*Tiic_baud_clk, 3:<3*Tiic_baud_clk
|
|
u8 io_filter;
|
|
};
|
|
#include "iic_soft.h"
|
|
#include "iic_hw_v2.h"
|
|
// #include "iic_hw_v1.h"
|
|
|
|
/******************************soft iic*****************************/
|
|
//如果无reg_addr:reg_addr=NULL,reg_len=0
|
|
//return: <0:error, =read_len:ok
|
|
int soft_i2c_master_read_nbytes_from_device_reg(soft_iic_dev iic,
|
|
unsigned char dev_addr, //设备地址
|
|
unsigned char *reg_addr, unsigned char reg_len,//设备寄存器地址，长度
|
|
unsigned char *read_buf, int read_len);//缓存buf，读取长度
|
|
|
|
//如果无reg_addr:reg_addr=NULL,reg_len=0
|
|
//return: =write_len:ok, other:error
|
|
int soft_i2c_master_write_nbytes_to_device_reg(soft_iic_dev iic,
|
|
unsigned char dev_addr, //设备地址
|
|
unsigned char *reg_addr, unsigned char reg_len,//设备寄存器地址，长度
|
|
unsigned char *write_buf, int write_len);//数据buf, 写入长度
|
|
|
|
|
|
|
|
|
|
/******************************hw iic master*****************************/
|
|
//如果无reg_addr:reg_addr=NULL,reg_len=0
|
|
//return: <0:error, =read_len:ok
|
|
int hw_i2c_master_read_nbytes_from_device_reg(hw_iic_dev iic,
|
|
unsigned char dev_addr, //设备地址
|
|
unsigned char *reg_addr, unsigned char reg_len,//设备寄存器地址，长度
|
|
unsigned char *read_buf, int read_len);//缓存buf，读取长度
|
|
|
|
//如果无reg_addr:reg_addr=NULL,reg_len=0
|
|
//return: =write_len:ok, other:error
|
|
int hw_i2c_master_write_nbytes_to_device_reg(hw_iic_dev iic,
|
|
unsigned char dev_addr, //设备地址
|
|
unsigned char *reg_addr, unsigned char reg_len,//设备寄存器地址，长度
|
|
unsigned char *write_buf, int write_len);//数据buf, 写入长度
|
|
|
|
|
|
void hw_iic_master_module_init();
|
|
|
|
#ifdef _IIC_USE_HW
|
|
#define get_iic_config(iic) get_hw_iic_config(iic)
|
|
#define iic_init(iic, config) hw_iic_init(iic, config)
|
|
#define iic_deinit(iic) //hw_iic_deinit(iic)
|
|
#define iic_start(iic) hw_iic_start(iic)
|
|
#define iic_stop(iic) hw_iic_stop(iic)
|
|
#define iic_reset(iic) hw_iic_reset(iic)
|
|
#define iic_err_reset(iic) hw_iic_err_reset(iic)
|
|
#define iic_tx_byte(iic, byte) hw_iic_tx_byte(iic, byte)
|
|
#define iic_rx_byte(iic, ack, err) hw_iic_rx_byte(iic, ack, err)//err:指针返回错误状态
|
|
#define iic_read_buf(iic, buf, len) hw_iic_read_buf(iic, buf, len)
|
|
#define iic_write_buf(iic, buf, len) hw_iic_write_buf(iic, buf, len)
|
|
#define iic_suspend(iic) /*hw_iic_suspend(iic)*/
|
|
#define iic_resume(iic) /*hw_iic_resume(iic)*/
|
|
|
|
#define i2c_master_read_nbytes_from_device_reg(iic, dev_addr, reg_addr, reg_len, read_buf, read_len) \
|
|
hw_i2c_master_read_nbytes_from_device_reg(iic, dev_addr, reg_addr, reg_len, read_buf, read_len)
|
|
#define i2c_master_write_nbytes_to_device_reg(iic, dev_addr, reg_addr, reg_len, write_buf, write_len) \
|
|
hw_i2c_master_write_nbytes_to_device_reg(iic, dev_addr, reg_addr, reg_len, write_buf, write_len)
|
|
#else
|
|
#define get_iic_config(iic) get_soft_iic_config(iic)
|
|
#define iic_init(iic, config) soft_iic_init(iic, config)
|
|
#define iic_deinit(iic) soft_iic_deinit(iic)
|
|
#define iic_start(iic) soft_iic_start(iic)
|
|
#define iic_stop(iic) soft_iic_stop(iic)
|
|
#define iic_reset(iic) soft_iic_reset(iic)
|
|
#define iic_err_reset(iic)
|
|
#define iic_tx_byte(iic, byte) soft_iic_tx_byte(iic, byte)
|
|
#define iic_rx_byte(iic, ack, err) soft_iic_rx_byte(iic, ack, err)
|
|
#define iic_read_buf(iic, buf, len) soft_iic_read_buf(iic, buf, len)
|
|
#define iic_write_buf(iic, buf, len) soft_iic_write_buf(iic, buf, len)
|
|
#define iic_suspend(iic) soft_iic_suspend(iic)
|
|
#define iic_resume(iic) soft_iic_resume(iic)
|
|
|
|
#define i2c_master_read_nbytes_from_device_reg(iic, dev_addr, reg_addr, reg_len, read_buf, read_len) \
|
|
soft_i2c_master_read_nbytes_from_device_reg(iic, dev_addr, reg_addr, reg_len, read_buf, read_len)
|
|
#define i2c_master_write_nbytes_to_device_reg(iic, dev_addr, reg_addr, reg_len, write_buf, write_len) \
|
|
soft_i2c_master_write_nbytes_to_device_reg(iic, dev_addr, reg_addr, reg_len, write_buf, write_len)
|
|
#endif
|
|
|
|
/******************************hw iic slave*****************************/
|
|
int hw_iic_slave_polling_rx(hw_iic_dev iic, u8 *rx_buf);
|
|
int hw_iic_slave_polling_tx(hw_iic_dev iic, u8 *tx_buf);
|
|
#endif
|
|
|